Comfort Glow Stoves Compared: Which One Heats Your Space?
Specs below are quoted from each Amazon listing. Scores are the average rating Amazon buyers left. Nothing on this page was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Selecting the right home comfort stove requires matching your living area, venting setup, and weekly heating routine to the appliance’s fuel capacity and output rating. Comfort Glow heating appliances, built by United States Stove Company, provide dedicated primary and supplemental heat across both automated wood pellet and traditional cordwood platforms. Rather than guessing how much heating power your home requires, evaluating square footage coverage, burn time durations, and refueling frequency ensures consistent warmth throughout the winter months.
This Comfort Glow stove comparison covers exactly three heating models: two digital pellet burners and one compact firewood unit. These appliances differ significantly across their heat coverage, ranging from 750 square feet up to 2,800 square feet. They also vary in their physical dimensions, venting designs, hopper capacities between 60 and 120 pounds, and burn durations that run from an 8-hour log cycle up to 60 hours of continuous automated pellet feeding.
Which Comfort Glow Stoves Should You Buy
- For medium-to-large single-family residences up to 2,200 square feet needing daily automated heat: Comfort Glow Pellet Stove for Home (CGPS2100).
see 1 of 3 - For expansive floor plans up to 2,800 square feet requiring multi-day heating between hopper refills: Comfort Glow Pellet Stove for Home (CGPS2200).
see 1 of 3 - For small cabins, workshops, hunting lodges, and tiny homes up to 750 square feet burning cordwood: Comfort Glow Mighty Mini Wood Stove (CGWS750).
see 3 of 3
Comfort Glow Pellet Stove for Home
For expansive living spaces requiring extended burn durations, the heavy-duty Comfort Glow Pellet Stove for Home under model number CGPS2200 expands heating coverage up to 2,800 square feet. This tower-style floor-mount heater is finished in black and measures 27 inches deep, 26 inches wide, and 37.5 inches high, weighing in at a substantial 245 pounds. Its defining engineering feature is an oversized 120 lb hopper that delivers up to 60 hours of continuous heating on a single load of wood pellets, making it a viable option for long weekends or sustained freezing conditions without constant hopper checks.
Operating controls on this high-output tower are side-mounted for convenient access, featuring an LED digital control display with integrated thermostat monitoring. Like its smaller sibling, it incorporates a high-efficiency 200 CFM heat circulating blower to actively push heated air through large living rooms, kitchens, bedrooms, and connecting hallways. The appliance includes a remote control for distance operation, a large viewing glass area for monitoring the combustion chamber, and full approval for mobile home installation. Combustion runs on solid wood pellets, delivering high-efficiency output while managing fuel feed automatically.
This model is built specifically for large homes, multi-story open plans, and remote properties where filling a stove every morning is impractical. Where it gives way is in compact spaces: placing a 245-pound, 2,800-square-foot tower inside a compact cabin or small single room will quickly lead to overheating and wasted fuel. Cabin owners and rural property caretakers who balance heating systems with outdoor living gear such as a camp chef grill box often find that matching stove capacity directly to room square footage prevents unnecessary fuel consumption.
- Heats expansive domestic layouts up to 2,800 square feet
- Oversized 120 lb hopper capacity allows up to 60 hours of burn time
- Side-mounted LED digital control board with thermostat and handheld remote
- Constructed as a 245-pound tower unit with 200 CFM circulating blower
What Sets These Models Apart
| Model | Heating Coverage | Fuel Type & Capacity | Burn Duration | Control & Blower Type |
|---|---|---|---|---|
| Comfort Glow CGPS2100 | Up to 2,200 sq ft | Wood Pellets (60 lb hopper) | Up to 30 hours | Top digital LED panel, remote, 200 CFM blower |
| Comfort Glow CGPS2200 | Up to 2,800 sq ft | Wood Pellets (120 lb hopper) | Up to 60 hours | Side digital LED panel, remote, 200 CFM blower |
| Comfort Glow CGWS750 | Up to 750 sq ft | Cordwood (Fits 11″ logs) | Up to 8 hours | Manual air draft control, natural chimney draft |
Figures in this table are copied from the Amazon listings for these models.
Buying Tips for Comfort Glow Stoves
Determining which Comfort Glow stove to buy begins with evaluating your access to electricity and your preferred fuel storage habits. The CGPS2100 and CGPS2200 pellet stoves rely on residential power to spin their fuel auger motor, operate the LED control board, and power the 200 CFM convection blower. These automated systems deliver steady, set-it-and-forget-it warmth suitable for modern primary residences. Conversely, the CGWS750 wood stove operates entirely without grid power, relying on natural convective draft through a standard 6-inch flue pipe. That makes it an ideal option for off-grid properties, rural camps, or emergency backup heating during winter utility failures.
Pay close attention to the Comfort Glow stove hopper size when choosing between pellet models. A 60 lb hopper holds one and a half standard 40-pound pellet bags and provides up to 30 hours of continuous burn time, requiring attention once per day in sustained cold weather. The 120 lb hopper on the CGPS2200 holds three full bags of pellets, delivering up to 60 hours of continuous operation. If you spend long hours away from the home or want heating over an entire weekend without reloading, the larger hopper capacity eliminates the chore of daily refilling.
Finally, measure your installation footprint and review venting configurations before finalizing a purchase. Pellet stoves require dedicated pellet vent pipe and proper rear clearances, though both Comfort Glow pellet units carry mobile home certifications when installed with proper intake air kits. The Mighty Mini wood stove requires a 6-inch single-wall flue connection and comes with an integrated rear heat shield to reduce wall clearance requirements. Always inspect your floor support capacity, as the CGPS2200 tower weighs 245 pounds dry before adding 120 pounds of wood pellet fuel.
FAQ
Are Comfort Glow pellet stoves approved for mobile home use?
Yes, both the CGPS2100 and CGPS2200 pellet stoves are mobile home approved solid fuel appliances. Safe operation in manufactured homes requires following all manufacturer installation requirements, including dedicated venting and outside combustion air intake. The CGWS750 wood stove is also listed as mobile home approved in the USA when installed with its included heat shield and approved chimney pipe.
How do the Comfort Glow stove hopper sizes compare between models?
The CGPS2100 features a 60 lb hopper capacity, providing up to 30 hours of continuous operation depending on the thermostat setting. The larger CGPS2200 includes a 120 lb hopper capacity, extending continuous burn time up to 60 hours on a single fill. The CGWS750 does not utilize a hopper, burning cut firewood logs up to 11 inches in length inside its manual firebox for up to 8 hours per load.
Do Comfort Glow pellet stoves work during a power outage?
Because Comfort Glow pellet stoves use an automated electronic fuel auger, an LED digital thermostat display, and an electric 200 CFM circulating blower, they require an active electrical connection to function. To operate them during utility grid failures, you must connect the unit to an auxiliary power inverter, generator, or battery backup system. The Comfort Glow Mighty Mini wood stove operates completely independent of electricity.
What size chimney pipe is needed for the Comfort Glow Mighty Mini wood stove?
The Comfort Glow Mighty Mini wood stove connects to standard 6-inch single wall flue piping. The appliance comes supplied with a 6-inch flue collar, diffuser, and attachment hardware, allowing it to adapt to standard vertical chimney systems designed for residential solid fuel heating.
Can I adjust heat output on Comfort Glow stoves with a remote control?
The Comfort Glow CGPS2100 and CGPS2200 pellet stoves come equipped with a handheld remote control that allows you to change temperature levels and operating settings from across the room. The CGWS750 wood stove does not support electronic remote functionality and is regulated manually using the stove’s integrated air intake dampers.






