Worx Work Tables Compared: Pegasus, Sidekick and the Clamp Dog Set

3 models compared October 22, 2026 9 min read

Specs below are quoted from each Amazon listing. Scores are out of 10, based on listed specifications and buyer feedback. Nothing on this page was handled or measured by us.

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Finding the right worx work table comes down to how much weight your projects demand, how much floor space you have available, and whether you need integrated clamping for heavy carpentry or a grab-and-go station for rapid assemblies. Worx builds its portable work surfaces around molded ABS resin decks, steel structural bracing, and versatile dog-hole arrays. Rather than forcing one bulky bench onto every type of craftsman, the lineup provides modular options that fold flat for closet or trunk storage while maintaining rigid stability on driveways, job sites, and uneven ground.

This worx work table comparison covers exactly three items from the brand: the heavy-duty 2-in-1 Pegasus table and sawhorse (model WX051), the lightweight Sidekick folding table (model WX066), and the official four-piece clamp dog set (model WA0091). These selections range from a primary workshop centerpiece capable of supporting substantial lumber to an agile thirteen-pound utility station and the dedicated positioning hardware that expands holding configurations across both platforms.

Which Worx Work Tables Should You Buy

Buy the Pegasus if you need a primary worx portable workbench for garage projects that doubles as a high-capacity cutting sawhorse with integrated bar clamps.
Buy the Sidekick if you prioritize ultra-portable mobility, rapid one-handed transport, and clean setup for lightweight assembly or craft tasks.
Buy the four-piece clamp dog set if you already own a Pegasus or Sidekick and want to replace lost stops or clamp round, curved, and wide workpieces securely across open bench dog holes.

1 of 3
WORX

WORX Portable Folding Workbench

9.6
/10
Our score

Top-rated
Scored 9.2/10 or higher

Check it on Amazon

Affiliate link. Price and stock live at Amazon and change there, not on this page.

Best for
Heavy garage woodworking and sawhorse duty

Pros

Dual workbench and 1000-lb sawhorse modes
Includes two quick clamps and four clamp dogs
Integrated deck measuring guide

Cons

Heavier carrying weight at thirty pounds

The WORX Portable Folding Workbench, designated model WX051, serves as the heavy-duty foundation of the Worx modular bench family. Built with a reinforced molded ABS plastic top and rigid steel supports and fittings, this unit balances structural toughness with collapsible convenience. At thirty pounds, it carries comfortably under one arm when folded flat, yet sets up instantly to deliver a substantial thirty-one-inch by twenty-five-inch working surface at an ergonomic thirty-two-inch working height. A molded measuring guide runs directly across the deck surface, eliminating the need to hold a tape measure while aligning repetitive crosscuts or assembly joints.

What defines the worx pegasus work table is its dual-mode utility. In standard workbench mode, the table supports three hundred pounds of tools, hardware, and raw materials. When you fold the folding wings down, the unit converts seamlessly into a rugged sawhorse with an impressive worx work table weight capacity of one thousand pounds. This high threshold makes it suitable for stacking dimensional framing lumber, mounting heavy equipment, or staging hefty mechanical components. The package includes two twenty-four-inch quick-acting bar clamps that lock into channels on the table surface, providing up to three hundred and one pounds of clamping force, alongside four molded clamp dogs that drop into pre-drilled surface holes to grip irregular items.

This model is the ideal choice for woodworkers, DIY remodelers, and mechanics who demand maximum clamping power and load capacity without installing a permanent, immobile bench. When garage tasks produce heavy sawdust, clearing your workspace with a worx blower 20v keeps the clamp channels and measuring guides clean between operations. While thirty pounds requires more lifting effort than compact alternatives, the Pegasus provides industrial rigidity backed by a three-year manufacturer warranty.

Dual-function design converts quickly between a three-hundred-pound workbench and a one-thousand-pound sawhorse
Includes two integrated twenty-four-inch bar clamps delivering three hundred and one pounds of clamping pressure plus four clamp dogs
Spacious thirty-one-inch by twenty-five-inch surface with built-in measurement markings
Reinforced molded ABS resin deck paired with steel support legs and mechanical latches

2 of 3
WORX

WORX Sidekick Portable Folding All-in-one Work

8.4
/10
Our score

Check it on Amazon

Affiliate link. Price and stock live at Amazon and change there, not on this page.

Best for
Mobile DIYers needing lightweight portable support

Pros

Extremely lightweight at thirteen pounds
Holds up to three hundred pounds
Includes link locks and clamp dogs

Cons

Lacks integrated bar clamp tracks

The WORX Sidekick Portable Folding All-in-one Work bench, cataloged as model WX066, targets maximum portability without compromising essential job-site strength. Tipping the scales at a remarkably light thirteen pounds, this worx folding workbench collapses in seconds into a compact profile that slips effortlessly into compact car trunks, tight closet corners, or utility shelving. Despite its featherweight frame, Worx engineered the Sidekick using durable ABS resin and steel framing components, allowing the platform to support an impressive three-hundred-pound payload during active cutting, fastening, and assembly chores.

Stability on soft or uneven surfaces is a frequent problem for portable folding tables, but the Sidekick counters this with metal legs specifically engineered to stay firmly planted on pavement, shop floors, and soft outdoor turf without slipping or sinking. The working surface features pre-drilled holes designed to accept standard bench dogs. Worx includes four clamp dogs right in the box, giving users the ability to trap circular shapes, mitered moldings, and flat boards directly on the deck to prevent shifting while drilling or sanding.

For DIYers deciding on the worx pegasus vs sidekick question, the Sidekick is built for rapid deployment, light trades, and secondary staging rather than structural sawhorse duties. It includes two link locks that attach directly to the side rails, allowing you to connect multiple Sidekick benches together or dock side-by-side with a Pegasus unit to create a seamless, expansive workspace. If you frequently handle seasonal yard equipment repairs on the deck, having fresh worx trimmer line on hand alongside your portable workstation makes quick work of outdoor tool maintenance.

Weighs only thirteen pounds for effortless transport and quick storage in confined areas
Robust three-hundred-pound weight capacity handles heavy assembly and power tool tasks
Engineered metal legs maintain rigid footing on both solid garage floors and soft ground
Supplied with two link-lock connectors and four surface-gripping clamp dogs

3 of 3
WORX

Worx 4pc Clamp Dog

9.4
/10
Our score

Top-rated
Scored 9.2/10 or higher

Check it on Amazon

Affiliate link. Price and stock live at Amazon and change there, not on this page.

Best for
Expanding clamping positions on Worx worktables

Pros

Direct fit for Pegasus and Sidekick tables
Secures circular and irregular project shapes
Complete four-pack set

Cons

Requires compatible Worx table to use

The Worx 4pc Clamp Dog set, bearing model number WA0091, is the specialized positioning hardware designed exclusively for the Worx modular table ecosystem. Both the Pegasus and Sidekick work surfaces feature precision-molded circular peg holes engineered to receive these sturdy clamp dogs. When pressed into the deck, clamp dogs act as low-profile stops and mechanical friction points that capture workpieces from multiple angles, keeping your hands entirely clear of cutting paths, router bits, and drill chucks.

While both Worx workbenches include four clamp dogs in their original packaging, ambitious woodworking and assembly setups frequently require more than four holding points. Adding this four-pack set enables you to secure complex curved items, circular table tops, large sheet materials, and long molding strips that standard two-point clamping cannot immobilize. They also serve as an essential direct replacement pack if original clamp dogs are lost, misplaced, or worn down over years of heavy shop duty.

Manufactured to precise factory tolerances, each clamp dog in the WA0091 pack slots smoothly into place without binding or wobbling. Their low-profile height prevents saw blades, sander pads, and hand planes from colliding with the holding hardware during close-tolerance surface work. For anyone looking to get the highest utility out of their Worx modular platform, keeping an extra pack of positioning dogs in your toolbox ensures you never encounter an awkward shape you cannot firmly anchor.

Direct-fit positioning hardware engineered for Worx Pegasus and Sidekick work tables
Provides multi-point stabilization for round, contoured, or irregular workpieces
Low-profile form factor prevents interference with cutting tools and power sanders
Convenient four-pack serves as an immediate replacement or a holding capacity expansion

What Sets These Models Apart

Choosing between these Worx products comes down to matching your intended workload against weight, integrated hardware, and surface capacity. The Pegasus stands as an all-in-one fabrication station featuring heavy-duty clamping rails and sawhorse transformation, while the Sidekick eliminates carrying fatigue with an ultralight frame suited for general assembly. The WA0091 clamp dog set acts as the universal utility accessory that enhances workpiece retention across both tables.

Feature	WORX Portable Folding Workbench (WX051)	WORX Sidekick Folding Work Bench (WX066)	Worx 4pc Clamp Dog Set (WA0091)
Primary Product Category	2-in-1 Workbench and Sawhorse	Portable Folding Work Table	Table Clamping Hardware
Maximum Weight Capacity	300 lbs (Table) / 1000 lbs (Sawhorse)	300 lbs	Not Applicable
Hardware Included	2 Bar Clamps, 4 Clamp Dogs	2 Link Locks, 4 Clamp Dogs	4 Clamp Dogs
Product Unit Weight	30 lbs	13 lbs	Listing does not specify

Figures in this table are copied from the Amazon listings for these models.

Buying Tips for Worx Work Tables

When deciding which worx work table to buy, evaluate the physical environment where you do most of your building. If you work primarily inside a garage or dedicated workshop where structural strength and board clamping take priority, the Pegasus WX051 delivers unmatched versatility. Its ability to absorb one thousand pounds in sawhorse mode means you can safely rest dense framing timbers, heavy plywood stacks, or large metal assemblies without fear of deck flex or joint collapse.

For DIYers who frequently carry gear up staircases, onto backyard decks, or across unimproved job sites, the Sidekick WX066 offers exceptional value through sheer portability. At thirteen pounds, it demands minimal effort to carry, making it the perfect staging table for painting, plumbing repairs, or power tool mounting. Because the Sidekick matches the thirty-two-inch working height of the Pegasus, you do not have to commit exclusively to one model; you can deploy a Sidekick as an outfeed support table linked directly to your Pegasus using the included link-lock hardware.

Remember that clamping accessories dramatically increase the functional versatility of any work surface. If your projects involve routing, sanding odd shapes, or edge-gluing panels, four clamp dogs can leave you short on hold-down points. Investing in the WA0091 clamp dog expansion pack allows you to create customized clamping jigs directly on the bench deck, locking round furniture legs, decorative trim, and contoured panels solidly in place while keeping your hands safe and unobstructed.

FAQ

What is the difference between the Worx Pegasus and the Worx Sidekick?

The primary differences lie in weight, clamping mechanics, and load rating. The Pegasus WX051 weighs thirty pounds, includes two integrated bar clamps that provide three hundred and one pounds of clamping force, and features folding wings that convert it into a one-thousand-pound-capacity sawhorse. The Sidekick WX066 weighs just thirteen pounds, supports up to three hundred pounds, lacks built-in bar clamps, but includes link locks and folds down smaller for rapid mobility.

Can you connect the Pegasus and the Sidekick together?

Yes, Worx engineered both tables to share the same thirty-two-inch working height. By using the link locks that come included with the Sidekick, you can dock the Sidekick directly to the side of the Pegasus. This creates a larger, unified modular work surface that remains completely flush across project seams.

Do Worx work tables come with clamp dogs included?

Both the WORX Portable Folding Workbench (Pegasus) and the WORX Sidekick Work Bench include four clamp dogs right out of the box. The standalone Worx 4pc Clamp Dog Set (WA0091) is sold separately for owners who want additional holding positions across the table deck or who need to replace lost original dogs.

How do clamp dogs hold workpieces in place on a Worx bench?

Clamp dogs slide directly into the circular holes molded into the surface of the Pegasus and Sidekick tables. When positioned against the edges of a workpiece, they act as mechanical stops. When paired with the bar clamps on the Pegasus or hand pressure, they trap circular, angled, or irregular items firmly against the deck to prevent twisting or sliding during cutting and sanding.

What is the weight capacity of a Worx work table?

The Sidekick supports up to three hundred pounds. The Pegasus supports three hundred pounds when opened as a flat workbench, but when its folding wings are dropped into sawhorse mode, its weight capacity increases to one thousand pounds.