ePawden vs Vancpet: Automatic Pet Feeders Compared by Specs
Specs below are quoted from each Amazon listing. Scores are out of 10, based on listed specifications and buyer feedback. Nothing on this page was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing the ePawden vs vancpet automatic pet feeder, you are looking at two selective feeders designed for multi-cat homes. Both units prevent food stealing by opening only for registered pets and support wet and dry food. The main difference lies in their recognition technology. The ePawden model uses both microchips and RFID tags, while the Vancpet unit relies solely on RFID collar tags. This affects which pets can access each bowl.
Pet Recognition
Microchip and RFID tag
RFID collar tag only
Power Source
Rechargeable built-in battery
USB-C or battery
Food Capacity
500 ml
400 ml
Bowl Material
Stainless steel
Not listed
Temperature Control
Not listed
2 pre-freezable ice packs
Dimensions
7.6 x 8.5 x 9.7 inches
8.3 x 8.7 x 7.9 inches
Choose the first if
- You need to feed cats with implanted microchips
- You want a larger food capacity for longer intervals
- You prefer a stainless steel bowl for hygiene
Choose the second if
- You want to use included ice packs for wet food
- You prefer a feeder that runs on standard batteries
- You only use RFID collar tags for identification
Verdict
Choose the ePawden if your cats have microchips or if you need a larger bowl with stainless steel hygiene. Pick the Vancpet if you rely on collar tags and want the included ice packs to keep wet food cool.
ePawden vs Vancpet Spec Comparison
Recognition Technology
Edge: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden M0103000 supports both implanted microchips and RFID collar tags, offering flexibility for cats with or without collars. It recognizes FDX-B 15-digit microchips and allows registration of up to 15 pets. The Vancpet VC009 relies solely on RFID collar tags, which are included. This means the Vancpet cannot identify cats with only implanted chips. If your household has cats with varied identification methods, the ePawden provides broader compatibility without requiring additional accessories for microchip-only pets.
Power and Battery
Edge: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden features a built-in rechargeable battery that charges via USB-C in about four hours. A single charge lasts up to six months of daily use, eliminating the need for disposable batteries. The Vancpet VC009 offers dual power options: USB-C or standard batteries. However, the data does not specify battery life or capacity for the Vancpet. For users seeking minimal maintenance and fewer battery replacements, the ePawden’s long-lasting rechargeable system is more practical for consistent daily feeding routines.
Food Capacity
Edge: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden M0103000 bowl holds 500 ml of food, which is sufficient for a full meal. The Vancpet VC009 has a slightly smaller capacity of 400 ml. While both sizes work for wet and dry food, the ePawden offers 25 percent more space. This extra volume may reduce the frequency of refills in multi-cat households. If you prefer fewer refilling tasks, the larger bowl of the ePawden is the more convenient choice for daily meal management.
Wet Food Cooling
Edge: Vancpet VC009 400ml RFID Feeder
The Vancpet VC009 includes two pre-freezable ice packs to help keep wet food cooler during feeding. This feature is useful for short-term freshness without electric refrigeration. The ePawden data does not mention any cooling accessories or temperature control features. It relies on a sealed lid to protect food but lacks specific cooling aids. If keeping wet food cool is a priority for your cats, the Vancpet’s included ice packs provide a distinct advantage over the ePawden.
Bowl Material
Edge: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden M0103000 includes a food-grade 304 stainless steel bowl that is dishwasher safe. Stainless steel is durable, easy to clean, and does not retain odors, making it suitable for cats with sensitive skin. The Vancpet VC009 data does not specify the bowl material. It mentions a covered bowl but lacks details on whether it is plastic or metal. For hygiene and durability, the confirmed stainless steel construction of the ePawden is a clearer benefit for long-term use.
Dimensions and Weight
Edge: Tie
The ePawden M0103000 measures 9.7 inches in length, 7.6 inches in width, and 8.5 inches in height, weighing 2.43 pounds. The Vancpet VC009 is slightly wider at 8.3 inches, 7.9 inches long, and 8.7 inches high, with no listed weight. The ePawden is more compact in length and width, potentially fitting better in tighter spaces. The Vancpet is taller and wider but shorter in depth. Consider your counter space when choosing between the ePawden’s compact footprint and the Vancpet’s broader base.
Which feeder matches your cat setup
You have multiple cats with implants
Our pick: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden M0103000 supports both implanted microchips and RFID tags. You can register up to 15 pets without an app. The USB-C rechargeable battery lasts up to six months. The stainless steel bowl is dishwasher safe and holds 500 ml. This flexibility suits multi-cat homes with mixed identification methods.
You prefer simple tag-based access
Our pick: Vancpet VC009 400ml RFID Feeder
The Vancpet VC009 uses only RFID collar tags. It includes a collar tag for immediate use. The unit comes with two pre-freezable ice packs to keep wet food cool. It runs on USB-C power or batteries. This setup is straightforward for owners who do not want to manage microchip data.
You want long battery life
Our pick: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden features a built-in rechargeable battery that charges in about four hours. A single charge supports up to six months of daily use. You avoid replacing disposable C-cell batteries. The USB-C connection ensures you can recharge it easily. This long endurance reduces maintenance for busy owners.
You need wet food cooling
Our pick: Vancpet VC009 400ml RFID Feeder
The Vancpet VC009 includes two pre-freezable ice packs. These help keep wet food cooler during short feeding routines. The covered bowl protects the food. This feature is useful if you serve fresh wet meals and want to maintain temperature without electric refrigeration. It supports weight control by keeping meals fresh.
ePawden M0103000 Rechargeable Microchip Feeder
Best for: Multi-cat homes needing selective feeding
- Food Capacity
- 500 ml
- Food Type
- Wet and dry food
- Connectivity
- RFID, microchip
- Power Source
- Rechargeable built-in battery, USB-C
- Suitable For
- Multiple Cats
- Target Pet
- Cats, Multi-Cat Homes
The ePawden Microchip Pet Feeder uses RFID and microchip recognition to prevent food stealing. It features a 500 ml food capacity and a rechargeable built-in battery that charges via USB-C. The unit includes a stainless steel bowl and supports up to 15 registered pets. This feeder suits multi-cat homes where selective feeding is necessary.
- Dual mode recognition for microchips and RFID tags
- Rechargeable battery lasts up to 6 months on a single charge
- Includes a dishwasher-safe 304 stainless steel bowl
- Registers up to 15 pets per feeder
- 500 ml food capacity is smaller than the standard 2-3 liter tanks found on other automatic feeders
- Weighs 2.43 pounds, making it bulkier than basic gravity or timer-based feeders
- Maximum 500 ml capacity limits usage for larger meals or longer intervals between refills
- You have multiple cats and need to prevent food stealing
- You want to avoid replacing disposable C-cell batteries
- You prefer a stainless steel bowl for hygiene
- You need a large capacity for extended periods without refilling
- You only have one pet and do not need selective feeding
- You prefer a lightweight and compact unit for small spaces
Verdict: The ePawden Microchip Feeder is a practical choice for multi-cat households needing selective feeding. It fits owners who value battery convenience and stainless steel hygiene over large food capacity.
Vancpet VC009 400ml RFID Feeder
Best for: Multi-cat homes with separate diet needs
- Food Capacity
- 400ml
- Food Type
- Wet and dry food
- Connectivity
- RFID
- Temperature Control
- 2 ice packs
- Power Source
- USB-C or battery
- Target Pet
- Cats
The Vancpet VC009 uses an RFID collar tag to control access for multi-cat homes. It holds 400ml of wet or dry food and includes two ice packs for temperature management. Power comes from USB-C or batteries. The unit measures 8.3 by 7.9 by 8.7 inches. This feeder suits owners who need to manage special diets or prevent food stealing among cats.
- RFID collar tag access prevents other pets from eating assigned meals
- Supports both wet and dry food types
- Includes two pre-freezable ice packs for cooling
- Dual power options via USB-C or batteries
- 400ml food capacity is limited for larger portions
- Requires a collar tag rather than reading implanted microchips
- Ice packs provide temporary cooling instead of active refrigeration
- You have multiple cats and need to control individual meal access
- You feed wet food and want to keep it cool for short periods
- You prefer battery backup alongside USB-C power
- You need to feed more than one cat from a single large bowl without tags
- You require active electric refrigeration for wet food
- You want to use existing implanted microchips without a collar
Verdict: Vancpet RFID Cat Feeder 400ml is a solid choice for multi-cat households managing separate diets. It works best when you use the included collar tag to restrict access to specific meals.
Specifications side by side
| Spec | ePawden M0103000 Rechargeable Microchip Feeder | Vancpet VC009 400ml RFID Feeder |
|---|---|---|
| Food Capacity | 500 ml | 400ml |
| Food Type | Wet and dry food | Wet and dry food |
| Connectivity | RFID, microchip | RFID |
| Temperature Control | – | 2 ice packs |
| Power Source | Rechargeable built-in battery, USB-C | USB-C or battery |
| Suitable For | Multiple Cats | – |
| Target Pet | Cats, Multi-Cat Homes | Cats |
| Size | Medium | 400ML |
| Pet Recognition | Microchip, RFID | RFID |
| Bowl Type | Stainless Steel Bowl | – |
| Material | Stainless Steel | – |
| Dimensions | 9.7 × 7.6 × 8.5 inches | 7.9 × 8.3 × 8.7 inches |
| Weight | 2.43 pounds | – |
| Color | 002 | White-D |
| Model | M0103000 | VC009 |
Frequently asked questions
Which feeder is smaller for tight spaces?
The ePawden M0103000 has a more compact footprint. It measures 7.6 inches wide and 9.7 inches long. The Vancpet VC009 is slightly wider at 8.3 inches. Both are medium-sized units. The ePawden model also weighs 2.43 pounds. This makes it easier to place in corners or on shelves where space is limited.
Does either feeder use a rechargeable battery?
Yes, the ePawden M0103000 uses a rechargeable power source. This allows you to charge it via USB without buying disposable batteries. The Vancpet VC009 does not list a rechargeable battery in its specifications. You should check its manual for its specific power requirements if you prefer not to use standard batteries.
What material is the food bowl made of?
The ePawden M0103000 features a stainless steel bowl. This material is durable and easy to clean for daily hygiene. The Vancpet VC009 does not specify the bowl material in its provided data. If you prioritize hygiene and durability, the stainless steel option in the ePawden model is the clear choice.
Can I register more than one cat?
Both feeders support multiple cats. The ePawden M0103000 allows you to register up to 15 pets. This is ideal for larger multi-cat households. The Vancpet VC009 is also designed for multi-cat homes. It uses RFID tags to restrict access. You should verify the exact number of pets it supports in its user manual.
Which feeder is better for cats without collars?
The ePawden M0103000 is better for this scenario. It recognizes implanted microchips in addition to RFID tags. This means you do not need to force your cat to wear a collar. The Vancpet VC009 relies solely on RFID recognition. You would need to ensure your cat wears the included collar tag for it to work.
What type of food do these feeders hold?
Both units are designed for dry food. The ePawden M0103000 specifies dry food compatibility. The Vancpet VC009 also lists dry food as its supported type. Neither product data indicates support for wet or fresh food. You should only use dry kibble to prevent clogging the dispensing mechanism in either device.
