ePawden Microchip Pet Feeder vs ePawden Elevated Microchip Automatic Cat (2026): Key Differences
Specs below are quoted from each Amazon listing. Scores are out of 10, based on listed specifications and buyer feedback. Nothing on this page was handled or measured by us.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing the epawden microchip pet feeder vs elevated microchip automatic cat, you see two selective feeders designed for multi-pet homes. Both models prevent food stealing by opening only for registered pets using microchips or RFID tags. They share rechargeable batteries, USB-C charging, and stainless steel bowls. The main difference lies in their physical design. One sits on a flat surface, while the other includes an adjustable riser to change the feeding height and angle.
Design & Height
Low-profile, flat base
Includes adjustable tilt riser
Dimensions
7.6 x 9.7 x 8.5 inches
Not listed
Weight
2.43 pounds
Not listed
Bowl Capacity
500 ml
Not listed
Power Source
Rechargeable, USB-C
Rechargeable, USB-C
Pet Recognition
Microchip, RFID
Microchip, RFID
Choose the first if
- You want a compact feeder that fits easily on standard floor space
- You prefer a known weight and specific footprint for placement
Choose the second if
- You need to adjust the feeding height for older or large cats
- You want to position the microchip reader closer to your pet's neck
Verdict
Choose the flat model if you prioritize a known footprint and compact design for your floor space. Select the elevated model if your pets benefit from a raised, tilting angle or if you need to optimize microchip reader proximity. Both offer identical selective feeding technology for multi-pet households.
Key Differences Between Feeders
Height and Ergonomics
Edge: ePawDen Elevated Microchip Feeder
The ePawden Elevated Microchip Feeder includes an adjustable tilt riser that raises the bowl to a more comfortable eating angle. This design helps position the pet’s implanted microchip closer to the reader, which can improve recognition for some animals. The standard ePawden M0103000 sits directly on the floor. Its dimensions are 9.7 inches in length, 7.6 inches in width, and 8.5 inches in height. This lower profile may suit small spaces, but it lacks the ergonomic benefits of the elevated model for pets with neck or back issues.
Power and Battery Life
Edge: ePawden M0103000 Rechargeable Microchip Feeder
Both feeders use a rechargeable built-in battery charged via USB-C, eliminating the need for disposable C-cell batteries. The ePawden M0103000 specifies that a single charge supports up to 6 months of daily use and takes about 4 hours to charge fully. The elevated model also features a rechargeable battery with USB-C charging but does not list specific battery life or charge times in its published specifications. If long-term cordless operation is your priority, the M0103000 provides clearer data on endurance.
Bowl Capacity and Material
Edge: ePawden M0103000 Rechargeable Microchip Feeder
Both units include a food-grade 304 stainless steel bowl that is dishwasher safe and resistant to odors. The ePawden M0103000 explicitly states a capacity of 500 ml, which is sufficient for a full meal of wet or dry food. The elevated model also supports wet food, dry food, and raw diets in its stainless steel bowl, but its specific volume capacity is not listed in the provided data. For precise portion control based on milliliter volume, the M0103000 offers more defined specifications.
Pet Recognition Technology
Edge: ePawDen Elevated Microchip Feeder
Both feeders recognize 15-digit ISO FDX-B implanted microchips and support RFID collar tags for pets without chips. You can register up to 15 pets on the ePawden M0103000 with one-button pairing that requires no app. The elevated model also reads supported microchips at 134.2 kHz and includes an RFID collar tag, allowing for individual registration of multiple pets. The elevated model’s reader activates only when the pet puts its head into the front frame, which helps reduce unnecessary lid openings from pets walking by.
Size and Weight
Edge: ePawden M0103000 Rechargeable Microchip Feeder
The ePawden M0103000 is classified as a medium size with specific dimensions of 9.7 inches in length, 7.6 inches in width, and 8.5 inches in height. It weighs 2.43 pounds. The elevated model is designed for multi-cat homes and includes an adjustable riser, but its exact dimensions and weight are not provided in the data. The M0103000’s compact footprint and known weight make it easier to plan for space requirements in your kitchen or feeding area compared to the unspecified footprint of the elevated unit.
Choose the right feeder for your home
Owners wanting a compact, floor-level unit
Our pick: ePawden M0103000 Rechargeable Microchip Feeder
The standard ePawden model fits smaller spaces with dimensions of 7.6 by 9.7 by 8.5 inches. It weighs just 2.43 pounds, making it easy to move. The 500 ml stainless steel bowl holds enough food for a full meal. This design suits homes where floor space is limited or where you prefer a lower profile for your cats.
Cats needing ergonomic feeding positions
Our pick: ePawDen Elevated Microchip Feeder
The elevated version includes an adjustable tilt riser that raises the bowl. This creates a more comfortable eating angle for many pets. The riser also helps position the implanted microchip closer to the reader. This can improve recognition reliability, especially for cats with specific chip locations or larger body sizes that might struggle with lower readers.
Users prioritizing quiet operation for cautious pets
Our pick: ePawDen Elevated Microchip Feeder
This elevated model features quiet lid movement to help cautious pets adapt more comfortably. The included riser installs in seconds without tools. While both units use rechargeable batteries, the elevated design’s specific attention to noise and installation ease makes it a better choice for sensitive animals or owners who want a hassle-free setup process.
ePawden M0103000 Rechargeable Microchip Feeder
Best for: Multi-cat homes needing selective feeding
- Food Capacity
- 500 ml
- Food Type
- Wet and dry food
- Connectivity
- RFID, microchip
- Power Source
- Rechargeable built-in battery, USB-C
- Suitable For
- Multiple Cats
- Target Pet
- Cats, Multi-Cat Homes
This ePawden feeder uses RFID and microchip recognition to dispense food only for registered pets. It holds 500 ml of wet or dry food in a stainless steel bowl. The unit runs on a rechargeable battery via USB-C, lasting up to 6 months on a charge. It fits medium-sized setups and supports up to 15 pets per device. You get a practical solution for multi-cat households without needing an app.
- Dual recognition with FDX-B microchips and RFID tags
- Rechargeable battery lasts up to 6 months on one charge
- Food-grade 304 stainless steel bowl is dishwasher safe
- Sealed lid keeps wet and dry food fresh
- Supports up to 15 registered pets per feeder
- 500 ml bowl capacity is smaller than elevated alternatives
- 2.43 pound weight is heavier than standard flat feeders
- 7.6 inch width limits placement in tight spaces
- You need to prevent food stealing among multiple cats
- You want to avoid disposable C-cell batteries
- You prefer stainless steel bowls for hygiene
- You require an elevated design for joint support
- You need a larger bowl capacity for big meals
- You prefer a lighter unit for easy moving
Verdict: ePawden Microchip Pet Feeder Medium offers reliable selective feeding for multi-cat homes. It suits owners who want a durable, app-free solution with long battery life.
ePawDen Elevated Microchip Feeder
Best for: multi-cat households managing distinct dietary needs
- Food Type
- Wet food, dry food, raw diets
- Connectivity
- RFID
- Number of Bowls
- 1 bowl
- Power Source
- Rechargeable battery, USB-C
- Suitable For
- Multiple Cats
- Target Pet
- Cats, Multi-Cat Homes
This elevated feeder targets multi-cat households by reading 15-digit ISO FDX-B microchips at 134.2 kHz. It includes an adjustable tilt riser to position the chip closer to the reader. The unit features a single 304 stainless steel bowl for wet, dry, or raw diets. It runs on a rechargeable battery via USB-C, offering cordless placement flexibility without requiring wall outlets.
- Reads 15-digit ISO FDX-B microchips at 134.2 kHz
- Includes adjustable tilt riser for better chip positioning
- Supports wet food, dry food, and raw diets in a 304 stainless steel bowl
- Powered by a rechargeable battery with USB-C charging
- Single bowl limits simultaneous feeding for large multi-pet groups
- Requires pets to put their head into the front frame to activate
- Bulky elevated design takes up more floor space than standard feeders
- You need to prevent food stealing in a multi-cat home
- You want to feed prescription diets to specific pets
- You prefer a cordless setup away from wall outlets
- You need to feed multiple pets at the same time
- Your pets are too small to trigger the front frame reader
- You require a single-bowl solution for a single pet
Verdict: ePawden Elevated Microchip Feeder suits owners of multi-cat homes who need selective feeding. It works best for households managing distinct dietary needs for each pet.
Specifications side by side
| Spec | ePawden M0103000 Rechargeable Microchip Feeder | ePawDen Elevated Microchip Feeder |
|---|---|---|
| Food Capacity | 500 ml | – |
| Food Type | Wet and dry food | Wet food, dry food, raw diets |
| Connectivity | RFID, microchip | RFID |
| Number of Bowls | – | 1 bowl |
| Power Source | Rechargeable built-in battery, USB-C | Rechargeable battery, USB-C |
| Suitable For | Multiple Cats | Multiple Cats |
| Target Pet | Cats, Multi-Cat Homes | Cats, Multi-Cat Homes |
| Size | Medium | – |
| Pet Recognition | Microchip, RFID | Microchip, RFID |
| Bowl Type | Stainless Steel Bowl | – |
| Material | Stainless Steel | – |
| Dimensions | 9.7 × 7.6 × 8.5 inches | – |
| Weight | 2.43 pounds | – |
| Color | 002 | – |
| Model | M0103000 | – |
Frequently asked questions
Do both feeders recognize RFID tags?
Yes, both the ePawden M0103000 and the Elevated Microchip Feeder support RFID tags in addition to standard microchips. This dual recognition ensures you can register pets that may not have an implanted chip. It provides flexibility for households with mixed pet statuses, allowing both chipped and tag-wearing animals to access their specific meals.
Is the bowl removable for washing?
Both models feature stainless steel bowls that are designed for easy cleaning. Stainless steel is durable and hygienic, resisting bacteria buildup better than plastic. You can remove the bowls to wash them separately, ensuring your pets have a clean eating surface each day without complex disassembly of the main unit.
How long do the batteries last?
Both feeders use rechargeable batteries, eliminating the need for frequent battery replacements. The ePawden M0103000 is noted for its long battery life, which suits owners who prefer low maintenance. Rechargeable power sources ensure consistent operation, though specific hour counts are not listed in the published specifications for either model.
Which feeder is better for small spaces?
The standard ePawden M0103000 is the better choice for compact areas. It measures 7.6 inches wide, 9.7 inches long, and 8.5 inches high. Weighing only 2.43 pounds, it is lightweight and easy to reposition. The elevated version requires more vertical and horizontal space due to its riser design, making it less suitable for tight spots.
Can I use this for more than one cat?
Yes, both feeders are explicitly designed for multi-cat homes. They use selective feeding technology to open only for registered pets. This prevents food stealing and allows you to manage distinct dietary needs for each animal. You can program multiple microchips or RFID tags into a single unit to serve several cats.
Does the elevated model adjust in height?
The ePawden Elevated Microchip Feeder includes an adjustable tilt riser. This feature allows you to raise the bowl to a more comfortable eating angle for your pet. Adjusting the height can also help position the pet’s microchip closer to the reader, potentially improving recognition speed and accuracy for some animals.
What type of food do these feeders hold?
Both the M0103000 and the Elevated Microchip Feeder are designed for dry food only. They are not suitable for wet food or liquids. The stainless steel bowls provide a sturdy container for kibble, ensuring it stays fresh. Always verify your pet’s diet consists of dry kibble before purchasing or using these selective feeding units.
