Emtek Deadbolt Latches: How to Pick the Right Backset and Corner Shape

The Emtek Deadbolt Latch with 2-3 4″ is a dedicated replacement mechanism designed specifically for doors requiring an extended distance between the door edge and the lock cylinder center. Known by model number EMDBL234S and manufacturer part number EMDBL234S10B, this unit serves as a direct emtek 2-3/4 backset deadbolt latch. Because many commercial entries and select residential doors feature thicker stiles that push the bore hole further from the frame, this extended latch accommodates those deep preparations without needing custom modification.

This model functions as an emtek square corner deadbolt latch, meaning the front faceplate features crisp 90-degree corners designed to sit flush in traditional chiseled mortise pockets. The listing specifies that mounting hardware is included, containing one complete piece intended for residential door security, office door security, and stylish door security setups. It utilizes hand control operation from the lock handle or thumbturn and connects to a keyed cylinder lock mechanism. Because all Emtek replacement latch items are made to order, verifying your door mortise pocket and 2-3/4-inch backset before purchase prevents installation delays.

• Fixed 2-3/4-inch backset engineered for deeper commercial and exterior residential door preps
• Square corner faceplate engineered to seat flush into chiseled door edge pockets
• Includes dedicated mounting hardware for straightforward one-piece replacement
• Operates via standard hand control mechanism connected to keyed Emtek cylinders

Best for
Standard doors with routered edge mortises

The Emtek EMDBL238R Deadbolt Latch with 2-3 is engineered for standard residential doorways requiring a compact backset and rounded mortise profile. Carrying model number EMDBL238R15A, this unit serves as a dedicated emtek 2-3/8 backset deadbolt latch. The 2-3/8-inch measurement represents the standard residential backset found on the vast majority of interior and exterior home doors, making this latch a primary candidate when replacing a worn or slipping bolt.

Unlike square-edged hardware, this model is an emtek radius corner latch, featuring smooth rounded edges on its faceplate. Doors cut using modern power routers typically feature curved pocket corners, allowing this radius faceplate to drop in without requiring extra chisel work. The listing highlights a durable stainless steel finish in pewter that resists corrosion while complementing contemporary modern styling. It operates via standard key lock cylinders with hand control movement. If your door has sharp rectangular mortises, this radius model will leave small visible gaps at the outer corners unless replaced with a square alternative.

• Standard 2-3/8-inch backset fits conventional residential door borehole configurations
• Radius corner faceplate drops directly into router-prepped door edge mortises
• Durable stainless steel finish construction in pewter offers corrosion resistance
• Hand control operation engineered for smooth interaction with keyed entry cylinders

Best for
Standard residential doors needing bronze square latches

The Emtek EMDBL238S10B Emtek EMDBL238S Deadbolt Latch is designed for homeowners who have standard 2-3/8-inch bore preparations paired with traditional square-edge mortise cuts. Listed under model EMDBL238S and part number EMDBL238S10B, this bare latch allows you to service an existing deadbolt without replacing exterior escutcheon plates or interior thumbturns. Emtek produces customizable door hardware with a focus on quality and style, making this part an exact mechanical fit for the brand’s lock series.

Constructed from solid bronze material, this latch mechanism offers exceptional mechanical durability and strength inside the door edge. The square faceplate corners require a clean rectangular mortise recess, which is standard on historically hung wood doors or entries prepped by hand using wood chisels. The listing does not specify whether extra mounting screws are packed in the box, so retaining your existing mounting hardware during disassembly is advisable. It functions specifically as a fixed 2-3/8-inch deadbolt latch, meaning it cannot adjust to doors prepped for a 2-3/4-inch backset.

• Fixed 2-3/8-inch backset designed for standard residential deadbolt bore locations
• Square corner profile sits level inside hand-chiseled mortise recesses
• Solid bronze material construction provides rigid mechanical durability
• Authentic Emtek parts replacement restores smooth locking functionality

Best for
Full modern upgrades needing square brass trim

The Emtek Hardware Deadbolt provides a complete single-cylinder lockset solution rather than just a standalone replacement latch. Designated as model 8469, the Emtek 8469 deadbolt features modern square design geometry crafted from solid brass with a Satin Nickel US15 finish. Instead of forcing you to choose between latch lengths before purchasing, this complete kit includes two separate latches right in the box: one standard 2-3/8-inch latch and one extended 2-3/4-inch latch, eliminating any guesswork surrounding door backset measurements.

This single-cylinder deadbolt incorporates an industry-standard C-keyway cylinder on the exterior and operates via a reversible, non-handed configuration suitable for left-hand or right-hand doors. The package comes fully equipped with the solid brass single-cylinder housing, square rosette, collar, strike plate, mounting screws, and an extension collar specifically designed for thin doors. Engineered for door thicknesses ranging from 1-3/4 inches to 2-1/8 inches, this model is recommended for residential doors and office doors where a complete architectural upgrade is preferred over repairing an isolated mechanical component.

• Includes two latches covering both standard 2-3/8-inch and extended 2-3/4-inch backsets
• Solid brass construction with sleek square modern rosette in Satin Nickel US15
• Non-handed reversible mechanism accommodates left-hand and right-hand door swings
• Includes mounting screws, strike plate, and extension collar for thin door versatility

Best for
Rounded door edges requiring oil rubbed bronze

The Emtek EMDBL238R10B Emtek EMDBL238R Deadbolt Latch provides a targeted replacement solution for doors prepped with curved mortise pockets and styled with dark architectural accents. Carrying part number EMDBL238R10B, this unit is an emtek 2-3/8 backset deadbolt latch featuring an Oil Rubbed Bronze finish. It allows property owners to fix sticky or failed deadbolt mechanisms while maintaining complete visual cohesion with existing dark bronze handlesets, knobs, and hinges.

Featuring radius corner faceplate geometry, this latch slides smoothly into rounded edge mortises common on modern factory-machined residential wood and fiberglass doors. The listing specifications note a mechanical knob controller type and an item weight of 16 ounces, reflecting substantial internal metal gearing. While the listing specifications mention a Wi-Fi connectivity protocol, this product operates mechanically inside the door pocket to throw and retract the physical bolt. It is built as a fixed 2-3/8-inch latch, making it incompatible with doors requiring a 2-3/4-inch backset.

• Standard 2-3/8-inch fixed backset engineered for residential installations
• Radius corner faceplate matches rounded routered door edge preparations
• Rich Oil Rubbed Bronze finish coordinates with dark Emtek decorative hardware
• Heavy-duty 16-ounce mechanical build ensures solid internal throw action

Best for
Complete lockset replacements wanting round rosettes

The Emtek Deadbolt Single Cylinder Solid Brass is a full single-cylinder deadbolt package designed for homeowners seeking soft, circular styling. Identified as model 8467, the Emtek 8467 deadbolt pairs solid brass construction with a Round Modern style rosette finished in Satin Brass US4. Like its square sibling, this package eliminates backset compatibility concerns by including two backsets in the order: the standard 2-3/8-inch latch and the extended 2-3/4-inch latch.

Intended for securing doors and enhancing home decor, this deadbolt utilizes a standard C-keyway cylinder with keyed entry on the exterior and hand-turn locking on the interior. The lock assembly is completely non-handed, operating smoothly regardless of whether your door swings from the left or the right. The listing specifies two pieces in the pack, including mounting screws, housing, collar, rosette, and an extension collar for thin doors supporting thicknesses from 1-3/4 inches up to 2-1/8 inches. If your existing deadbolt housing is tarnished or damaged, installing this complete assembly avoids the hassle of sourcing separate mechanical pieces.

• Dual backset latches included to fit both 2-3/8-inch and 2-3/4-inch borehole setups
• Solid brass single-cylinder design featuring round modern rosette in Satin Brass US4
• Non-handed reversible internal gearing accommodates any door swing direction
• Supplied with mounting screws and extension collar for doors up to 2-1/8 inches thick